User Manual Digicom3100SP Multi-screen Processor
56
Solution
1)
Check whether the cable connection is reliable;
2)
Check the physical connection of selected channel;
3)
Check whether the display has problem in above mentioned method;
4)
Close the window and restart the program.
Restart Windows and the program.
If the problem still isn’t solved, please contact VTRON or the distributor. We will reply as
soon as possible.
5. Vlink window display isn’t smooth
Reason
1)
The network speed doesn’t support; when the image refreshing rate of the Vlink window is
close to 10fps, the image will have obvious pause;
2)
Other unknown reasons.
Solution
1)
Check the network communication and replace the switch if necessary;
2)
Please contact VTRON or the distributor. We will reply as soon as possible.
6. Image flashing
Reason
1)
The cables are not connected properly and the grounding isn’t proper;
2)
The image refreshing frequency of the Multi-screen signal processor system is too low.
Solution
1)
Check the cable connection and grounding of the hardware system;
2)
Re-install the drivers and select appropriate refreshing frequency;
3)
Please contact VTRON or the distributor. We will reply as soon as possible.
