1.
Place the top corner bracket into the top left slot on
the bracket fitting tool.
2.
Position the bracket behind the rubber seal at the top
right corner of the frame. Carefully push until the metal
legs are behind the rubber seal. Check the bracket is
square to the sides of the frame and fully secure.
3.
Place the top corner bracket into the top right slot on
the bracket fitting tool.
4.
Position the bracket behind the rubber seal at the top
left corner of the frame. Carefully push until the metal
legs are behind the rubber seal. Check the bracket is
square to the sides of the frame and fully secure.
INSTALLATION STEPS
INTU Micro Beadfit
