12.
Remove the endcap covers from the headrail by
pulling them off.
13.
Remove the Velcro straps that wrap around the
blind. Do not remove the elastic bands.
14.
Remove the cords from the elastic band and allow
to hang from the blind. Do not remove elastic bands
from the blind.
15.
Align headrail endcaps with both top corner fixing
brackets and push fully home. Your headrail should now
be mounted to the frame.
11.
At the appropriate position(s) on each side profile, fit
retention clips (long side profiles only). Press into position
using the fitting tool.
16.
Align the bottom button with the bottom corner
brackets. Slide the bottom button onto the bracket
until it locates. Repeat for other side.
