GRA SERIES GAS FRYERS - GENERAL
KLEENSCREEN FILTRATION
SYSTEM
The Kleenscreen filtration system is integrated into
the GRA Series fryer battery. The filter is housed in a
pull-out drawer assembly at the base of the fryer.
The filtering components in the drawer include a
stainless steel filter tank, crumb-catch basket and a
dual element mesh filter screen. With the filter
drawer closed, a self-seating oil return line provides
the path to return the filtered shortening to the fry
tank.
This system is designed to provide a thorough and
easy method to filter the shortening.
Some of the benefits include:
•
Self-contained system eliminating the use of
external filter equipment.
•
Paperless filtering system.
•
Easy to clean and low maintenance.
Kleenscreen fryer batteries are available in a
minimum of two and a maximum of four fryer
sections. The fryer size of each section is identical.
A GRO Frymate (dump station) can also be included
as one or more of the sections.
SPECIFICATIONS
Electrical
•
120VAC supply. A 24VAC transformer provides
power for the fryer controls and the filtering
controls on Kleenscreen battery fryers.
Gas Pressures
Manifold (per fryer section):
•
Natural - 4" W.C.
•
Propane - 10" W.C.
Building supply pressure (Min):
•
Natural - 5" W.C. (7" W.C. battery units)
•
Propane - 11" W.C. (12" W.C. battery units)
NOTE:
Propane or Natural gases -14" W.C. (Max)
TOOLS
Standard
•
Standard set of hand tools.
•
VOM with A/C current tester (any quality VOM
with a sensitivity of at least 20,000 ohms per
volt can be used).
•
Temperature tester (thermocouple type).
•
U-Tube Manometer.
Special
•
Field service grounding kit (available locally)
•
OnWatch QuickLook™ 72, checks flame sense
and input voltage to the Honeywell S8600
series ignition control module with an
EnviraCOM™ port.
You can order the QuickLook™ 72 on line at
www.onwatchinc.com.
The OnWatch Combo
Item #721014 includes both the QuickLook™ 72
and a 3 ft. data port extension cable.
•
Burndy pin extraction tool RX2025 GE1;
Newark Electronics Catalog Number 16F6666.
Used for removing pin terminals on Burndy
connectors.
F25377 (March 2010)
Page 4 of 36
