P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
G R I D D L E S & B R O I L E R S
F-38309 (04/10)
VCRG-M RESTAURANT SERIES
GAS GRIDDLES
INSTALLATION INSTRUCTIONS
NOTE:
In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.
1. A gas pressure regulator supplied with the unit must be installed;
Natural Gas 4.0" (102 mm) W.C.
Propane Gas 10.0" (254 mm) W.C.
2. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible and 0" from non-combustible
constructions. All models require a 4" (102mm) bottom clearance
and must be installed with minimum 4" legs.
An adequate ventilation system is required for Commercial
Cooking Equipment (NFPA No. 96). Information may be
obtained by writing to the National Fire Protection Association,
Batterymarch Park, Quincy, MA 02169.
3. These units are manufactured for installation in accordance with
National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition).
Copies may be obtained from The American Gas Association,
Accredited Standards Committee Z223 @ 400 N. Capital St. NW,
Washington, DC 20001, or the Secretary Standards Council,
NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471.
NOTE: In The Commonwealth of Massachusetts
All gas appliances vented through ventilation hood or exhaust
system equipped with a damper or with a power means of exhaust
shall comply with 248 CMR.
4. This appliance is manufactured for commercial installation only
and is not intended for home use.
MODEL
WIDTH
DEPTH
OVERALL
HEIGHT*
WORKING
HEIGHT*
NO. OF
BURNERS
TOTAL
BTU/HR
NO. OF
DRAWERS
APPROX.
SHIP. WT.
VCRG24-M
24"
27"
16"
12
1
⁄
2
"
2
50,000
1
243 lbs/111 kg
VCRG36-M
36"
27"
16"
12
1
⁄
2
"
3
75,000
1
340 lbs/155 kg
VCRG48-M
48"
27"
16"
12
1
⁄
2
"
4
100,000
1
408 lbs/185 kg
*These are nominal dimensions and can vary by +1.75" with adjustable legs.
WIDTH: 24", 36", 48"
3/4" NPT
GAS INLET
1.75
20.5
13.0
12.4
20.5
27.0
7.0
16.0
4.0
22.3”, 34.3”, 46.3”
Chef's Corner
