Operator`s Manual
–
Electric Winch
14
2018-08-03, rev 1
ATTENTION
Never exceed a fleet angle of ±2° as indicated in the image below:
Dangerous Practices to be Avoided
DO NOT use a damaged, broken or otherwise malfunctioning winch
DO NOT use a winch before having read and understood the operator`s
manual
DO NOT use a winch that has been modified without the written approval
of the manufacture or a qualified engineer
DO NOT lift or pull more than the working load limit
DO NOT use the winch if the wire rope is twisted, pinched, damaged or
shows signs of excessive wear
DO NOT use a winch to lift, support or otherwise move people
DO NOT lift loads over people
DO NOT use a winch if people are not at a safe distance from the load or the
machine and remain at a safe distance throughout the whole maneuver
DO NOT attempt to lengthen or repair a damaged or broken wire rope
DO NOT use the wire rope as a sling or wrap it around the load in a choke
DO NOT lift with the tip of the hook or over the safety latch
DO NOT lift the load if with the weight is not evenly distributed across all
wire rope lines that pass through the pulley
DO NOT use the wire rope as an electric ground
DO NOT allow a welding electrode to touch the wire rope or the hook
DO NOT remove or modify the cautionary labels on the winch
DO NOT use a winch whose nameplate or safety and warning labels are
missing or illegible
DO NOT shock load the winch
DO NOT let an unqualified person to adjust or repair the equipment
DO NOT jog the load with the winch
