Install the Single Hanger onto the Swing
Rail.
Secure the U-Bolt onto the Swing Rail by
pushing the Single Hanger part up so that
the Rubber Tubes grip the Swing Rail.
Slide the Rubber Stopper over the top of
the U-bolt. Slide the Metal Plate over the
top of the Rubber Stopper.
Place a washer on both prongs of the Ubolt
and secure the bolts to the top of the
U-bolt.
1
STEP
2
STEP
Hook 1 carabiner onto the
bottom of the Single Hanger.
If you have a Vuly
Quest Monkey Bar
, please go to
step 5
ATTENTION!
Important:
Please remove Single Hanger from the frame when using different swing attachments, as this may cause a potential
head collision.
