32
2.1.3.5 Install the side (no. 3, Fig. 9, Fig. 10) and front (no. 9, Fig. 9) panels and align protrusions of
metal inserts (no. 10, Fig. 9) with cutouts in lower panel planes. Tighten the fastening nuts (no. 8, Fig. 9,
Fig. 10). Tighten the screws (no. 4, Fig. 9, Fig. 10) into the side panel handles.
2.1.3.6 Using s fluoroplastic tape, screw the steam bleeding nipple (no. 7, Fig. 9) into the steam
generator. Put the decorative nut (no. 6, Fig. 9) on the nipple, then screw the plug (no. 5, Fig. 9).
2.1.3.7 install the top cover (no. 2, Fig. 9) and fasten it with self-tapping screws.
2.2 Operation
2.2.1 Safety precautions
2.2.1.1 The Electric heater is an electric installation. Observe all rules and regulations contained in
current documents covering safety precautions and fire safety of the electric installations.
2.2.1.2 Do not touch the hot heater, this can cause burns. Be very carefully during operations with
herbal and besom steamers. The steam running out from the heater is very hot. Always use gloves.
2.2.1.3 Do not leave unattended children in sauna.
2.2.1.4 Be careful during poring the stones with water. The appearing steam can cause burns.
2.2.1.5 Do not put any items on the heater.
2.2.1.6 Do not obstruct the air circulation around the heater.
2.2.1.7 Do not use the damaged Electric heater (foreign odor, steam, inflaming, etc.).
2.2.1.8 Do not use solvents for heater cleaning.
2.2.1.9 Do not obstruct the sensor with any items.
Summary of Contents for PARiZHAR
Page 44: ......
