36
• Unscrew the plug of the upper nipple and install a filling funnel. When the upper steam generator
nipple is located on the side Electric heater panel, use a funnel with a hose of a corresponding
section.
• Fill the diluted reagent through the upper nipple into the steam generator tank.
• Insert the upper nipple plug.
• Start the descaling mode according to recommendations of the detergent manufacturer.
• When the descaling mode is complete, switch off the Electric heater.
• Close the filling valve.
• Open the drain valve and completely drain the solution from the steam generator tank.
ATTENTION!
To prevent failures of the system of automatic water level adjustment in the
steam generator tank, never switch on the steam generator, when the tank is not
completely filled or the water is being drained from the tank.
Summary of Contents for PARiZHAR
Page 44: ......