English
SCOPE OF DELIVERY
1. Setting tool
2. Nosepiece box with nosepieces
3. Open-jaw wrench for changing the nosepieces
4. Collecting bin
5. Cover cap
6. Hanger bracket
7. Belt clip
8. Battery with state-of-charge indicator (optional-
ly with two batteries)
9. Universal quick charger
10. Connecting cable with IEC power connector
11. Operating manual
12. L-Boxx (optionally in cardboard package) with
inlay
SAFETY PRECAUTIONS
EXPLANATION OF THE SYMBOLS /
PICTOGRAMS IN THE SAFETY PRECAU-
TIONS
This symbol draws attention to that
fact that hazards exist for the life
and health of persons.
Caution: Important safety precau-
tion or directive that must be strictly
observed in order to avoid the
risk of personal injury or machine
damage!
Wear protective goggles!
Before commissioning, read and
observe the operating instructions
and safety precautions!
Remove the mains plug.
General points to be observed.
GENERAL SAFETY PRECAUTIONS
Read all the safety precautions and
instructions. Store all safety precautions
and instructions in a safe place for future
reference.
Failure to observe safety precautions and
instructions can result in electric shock,
fire and/or serious injuries.
SAFETY AT THE PLACE OF WORK
Keep your place of work clean and well
illuminated. Untidiness or inadequately
illuminated places of work can result in
accidents.
Do not work with the setting tool in potentially ex-
plosive atmospheres where they may be inflamma-
ble liquids, gases or dusts. Setting tools generate
sparks that could ignite the dusts or vapours.
Keep children and other persons away when work-
ing with the setting tool. If distracted, you may lose
control over the tool.
ELECTRICAL SAFETY
The plug of the setting tool must fit
properly into the plug socket. The plug
must not be modified in any way. Do not
use adapter plugs in conjunction with
earthed setting tools. Non-modified plugs and
matching plug sockets reduce the risk of an electric
shock.
Avoid physical contact with earthed surfaces such
as those of pipes, heaters, cookers and refrigera-
tors. There is an increased risk of electric shock if
your body is earthed.
Keep setting tools away from water or rain. The
ingress of water into a setting tool increases the
risk of an electric shock.
Do not misuse the cable, e.g. for carrying the set-
ting tool, for hanging up the tool or for pulling the
plug out of the plug socket. Keep the cable away
from heat, oil, sharp edges or moving equipment
parts. Damaged or twisted cables increase the risk
of an electric shock.
When using a setting tool outdoors, use only ex-
tension leads that are also suitable for outdoor use.
The use of an extension lead that is suitable for
English | 13
