31
vwr.com I Instruction manual VWR® U Water System
Note
:
If the power outage exceeds 3 days, a
pop-up box will appear to reset the system Time &
Date.
3.2.3 Tank Setup
Choose the actual capacity of pure water tank.
Tap
Next
to enter
Other Devices
setup menu.
If the tank is not from VWR, choose
Custom
.
Setup the height and volume of the pure water
tank.
Then enter the Tank Level Sensor Range as
pressure. In Bar. Default sensor form VWR is 0.2
bar.
3.2.4 Other Devices Setup
Put
“√”
in the box of
Printer
if a printer is used.
Put
“√”
in the box of
Bio-filter
if a Bio-filter is
installed.
Put
“√”
in the box of
0.2 μm Final Filter
if a 0.2
μm final filter is installed.
Put
“ √ ”
in the box of
Tank UV
if a tank
sanitization module is installed.
Printer supported: Epson Dot matrix.
VWR
recommends Epson’s TM-U330D dot matrix
printer. Other USB based dot matrix printers may
not be supported.
After each dispense, the printer will automatically
print out the dispense time, water quality and
other displayed parameters.
USB