Instruction manual |
19
11.3 Use of light excluding plate
Microscope is provided with a light excluding plate that can be
placed on the stage and prevents flare and reflections coming
from the condenser front lens.
The plate can be used in two different ways.
Mode n° 1: place the plate on the stage (under the slide holder)
and place the slide directly over the plate. (Fig. 32)
Mode n° 2: lower the condenser and insert the plate between
the two layers of the stage. (Fig. 33).
In both cases it is possible to move the sample using the stage
X-Y translation knobs.
11.4 Use of UV shield
Microscope is provided with a UV protection shield. This can
be used to protect user from unwanted UV rays coming from
the fluorescence light source.
1
Loosen the two locking screws (1). (Fig. 34)
2
Insert the grooves of the UV shield (2) into the holes (Fig. 35)
and tighten the screws (1) again.
1
2
FIGURE 32
FIGURE 33
FIGURE 34
FIGURE 35