Instruction manual |
7
6. Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of
the container and lift the top half of the container. Take some care to avoid that the optical items
(objectives and eyepieces) fall out and get damaged. Using both hands (one around the arm and
one around the base), lift the microscope from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses.
Traces of grease or other residuals may deteriorate the final image quality and
corrode the optics surface in a short time.
7. Assembling
Once opened the box, the microscope parts are the following:
1
Microscope frame
2
Eyepieces
3
Objectives
‒
TL534B FL BG / TL534B FL: W-PLAN series
‒
TL534B-SA FL4: W-PLAN F series
4
Observation head
5
Epi-illuminator
6
Allen wrench
1
3
2
8
7
6
10
4
9
12
11
5
7
Tension adjustment tool
8
Immersion oil
9
Dust cover
10
Power supply
‒
6V for transmitted light
‒
12V for fluorescence
11
Light excluding plate
12
UV protection shield