There are three time format available as below:
1:YMD, 2:MDY, 3:DMY
Please insert micro sd card into VW898 and plug it to PC, it will
create automatically a txt file named “usercfg”.
To revise time stamp : open the TXT file and find the
“DateTime=0 ;YYYY/MM/DD-HH:MM:SS [Min:0, Max:0]”, fill in the
time starting from “DateTime=” such as 2014/06/13-12:10:00
To select time stamp format: open the TXT file and find the
DateTimeFormat=1;0:NOT Display Date/Time, 1:YMD, 2:MDY,
3:DMY [Min:0, Max:2] ,for example, DateTimeFormat=2
，
the format
is MM/DD/YYYY
，
the default format is 1.
Notice: only the numbers can be revised, the format can’t be
revised.
10.Driving recorder mode:
VW898 can record automatically after engine while charging and
can be charged via DC5V car charger adaptor (not included but
optional).
The Lens is 180° roating, when it works as a driving recorder, you
will have to mount VW898 upside-down by following up these
steps:
Insert the micro SD card
，
USB connect the VW898 to the computer
，
extract the SD_EBB66.bin file from the "Converse Angle" folder in
the firmware rar file and put the file in the root of the micro SD card,
unplug VW898, then press the ON/OFF button to power it on,
VW898 will upgrate the software automatically and then power off
and then delete the “SD_EB66.bin” automatically.
When VW898 works as a normal DVR, please change the lens
angle back to default obverse angle via following up the steps as
below:
Insert the micro SD card
，
USB connect the VW898 to the computer
，
extract the SD_EBB66.bin file from the "Obverse Angle" folder in
the firmware rar file and put the file in the root of the micro SD card,
unplug VW898, then press the ON/OFF button to power it on,
VW898 will upgrate the software automatically and then power off
and then delete the “SD_EB66.bin” automatically.
