5
Draft
Installation
Accessing the Secure USB Shell
Note:
No user serviceable parts inside the thin client. Please contact a VXL authorized
service professional to remove the casing and access the secure USB shell.
Warning
: Hot temperatures inside the thin client. Switch off and unplug the device,
leave it idle for at least 30 minutes before removing the top and the bottom
strips of the thin client.
Two USB ports are provided in the secure USB Shell. These ports are used in banking and
other secure IT implementations. The secure USB shell prevents wrongful use of these USB
ports. To use the secure USB ports:
1. Remove the screws from the top and bottom strips of the thin client.
Figure 2-1: Bottom Strip Screw
2. Slide and remove the side panels.
Warning
: Do not remove the screws of the aluminum metal enclosure.
3. Gently pull the bezel tabs outward on both the top and bottom strips simultaneously as
shown in the following figure.
Figure 2-2: Removing the Front Bezel
