Itona TC6500 Series
Thin Client
This Class B digital apparatus complies with Canadian ICES-003.
© 2013
VXL Instruments Limited.
600011055665 A01
Itona TC6500 Series Thin Client
Hardware Installation Guide
The Itona TC6500 Series package consists of the items listed below:
•
Itona TC6500 Series Thin Client
•
Power Cord Applicable to your Country (Optional)
•
Pedestal
•
Mouse (Optional)
•
This Manual
Safety Instruction
Follow these precautions when installing Itona TC6500 Series:
•
Use approved 3 Pin grounded power cord only. Ensure
that you plug the power cord into a grounded 3 pin
electrical outlet.
•
Allow approximately 4 Inches of space around the
product for effective ventilation.
•
Always place the client vertically for convection
cooling.
•
Do not operate this equipment in corrosive or explosive
environment.
Setting up the Itona TC6500 Series
1. Unpack the unit from the carton. Take care not
to drop the product when removing from the carton
as it may damage the product.
2.
Slide fit the pedestal to the bottom strip of the thin client.
3. Connect the mouse and keyboard to their respective
PS/2
ports. If you are using a
USB
keyboard or mouse, connect
them to the
USB
ports.
4. Connect serial device to the
COM
port.
5. Connect the network cable to the
Ethernet
port.
6. Connect the monitor to the
VGA
port.
7. Connect the power cable to a
grounded 3 pin
electrical
outlet.
Switching on the Itona TC6500 Series
Press the
Power Button
. You will hear a beep and subsequently the
operating system start-up screen appears.
1
2
Front View
Rear View
Ref
Components
1
Power Button
2
Smart Card Reader
3
Two USB Ports
4
Line In
5
Ethernet Port
6
LPT Port
7
PS/2 Mouse Port
8
Line Out
9
Mic
10
Four USB Ports
11
COM Port
12
VGA Port
13
PS/2 Keyboard Port
14
AC Power In
15
Pedestal
