23
2.5kVA Inverter Generator VF2200IG
1. Turn the locking knob on the engine access panel and set aside (see Figure 1).
2. Pull out oil access cover at the bottom of the case and clean the area around the oil
fill/drain plug. (See Figure 2).
3. Unscrew and remove plug. Using the supplied funnel, pour required amount of
engine oil (350 ml max) into engine (see Figure 3).
Figure 3: Oil Funnel
If oil level is below
this line it is too
low to operate.
Figure 4: Engine Oil Correct Level
Figure 1: Engine Service Panel
Figure 2: Oil Fill/Drain Plug
Figure 3: Oil Funnel
If oil level is below
this line it is too
low to operate.
Figure 4: Engine Oil Correct Level
Figure 1: Engine Service Panel
Figure 2: Oil Fill/Drain Plug
Figure 3: Oil Funnel
If oil level is below
this line it is too
low to operate.
Figure 4: Engine Oil Correct Level
Figure 1: Engine Service Panel
Figure 2: Oil Fill/Drain Plug
Summary of Contents for VF2200IG
Page 58: ...58...
