27
2.5kVA Inverter Generator VF2200IG
Starting the inverter
BEFORE STARTING THE INVERTER, REVIEW SAFETY SECTION STARTING ON
PAGE 6.
For proper starting and operation of the inverter, make sure you review the inverter
features and their descriptions starting on page 14.
Before attempting to start the inverter, verify the following:
• The engine is filled with engine oil (see Figure 4: Engine oil correct level).
• The inverter is situated in a proper location.
• The inverter is on a dry surface.
• All loads are disconnected from the inverter.
• The inverter is properly grounded.
!
DANGER
Never use the inverter in a location that is wet
or damp. Never expose the inverter to rain,
snow, water spray or standing water while in
use. Protect the inverter from all hazardous
weather conditions. Moisture or ice can cause a
short circuit or other malfunction in the electrical
circuit.
Never operate the inverter in an enclosed area.
Engine exhaust contains carbon monoxide.
Only operate the inverter outside and away
from windows, doors and vents.
Starting Inverter
1. Check oil and fuel levels. If it is the first time starting make sure to add oil (see Initial
Oil Fill on page 22).
2. For cold starting, turn the engine/fuel control switch to the CHOKE position (see
Figure 7). NOTE: If you are re-starting turn knob to RUN.
Figure 7: Turn Engine/Fuel Switch to CHOKE Position
Figure 8: Pull the Recoil Handle away from Inverter
Figure 9: Turn Engine/Fuel Switch to RUN
1
2
Figure 6: breakers 1 - operating 2- tripped
Summary of Contents for VF2200IG
Page 58: ...58...
