INSTALLATION INSTRUCTIONS AND SPECIFICATIONS
Stallone ‘F’ Range of LED Floodlights
Brown“L”
Retention wire
Please connect the same color or same
polar wires together.
Blue“N”
Yellow green
""
1
2
3
4
Please look at detail
A
on
the wiring place.
A
5
Luminaire can not be directly installed on the surface of ordinary flammable material in
any circumstance.
Warning: If outer flexible cable or cord of luminaire are damaged, only the manufacturer,
its agent or other eligible people can replace them to avoid accident.
Drill 2 holes in the cement wall/ground with
electric drill.
Cement wall/
Ground
Tap the screws into the holes as the sketch
shows.
Lock mounting bracket into the cement wall/
ground with plain washer, spring washer and
nut.
Connect the power wire and make insulation
and water-proof processing. Please look at
detail A at the wiring place.
Please connect wires as per appropriate color of power
cords as shown in diagram.
Loosen screws of lamp arm with spanner to
adjust lamp body until the beam angle meet
with customer’s requirement, then lock the
screws with spanner.
Adjust angle as required
Screw to lock angle
