FLUSH MOUNT 360° CEILING SENSOR VMOSS
ELECTRICAL SPECIFICATIONS
Supply Voltage Range
230-240Va.c. 50Hz
Load Rating
2000W Incandescent
400W LED
450W Fluorescent
400W Motor / Fan
Operating temp
Range 5°C - 40°C
Wire size
1x 2.5mm² to
2x 1.5mm²
TIMING AND LUX SPECIFICATIONS
Detection Method
Passive Infrared
(PIR)
Detection Angle
360°
Detection Range
6m Diameter
Time Adjustment
5 seconds to 30min
Lux Adjustment
10 to 2000Lux
Ceiling Cut-Out Size
60mm Diameter
INSTALLATION:
This product should be installed by a suitably
qualified person in accordance with Australian and
New Zealand Wiring rules.
Installation Position:
Ideally the sensor should be positioned between 2.4
and 4m above the area to be scanned.
To avoid nuisance tripping installation should try
and avoid areas:
1. With water features such as swimming pools
or ponds.
2. Near heat sources such as air conditioners,
dryers, fire places or heaters.
3. Areas which are subject to direct bright or
reflected lights or sunlight.
4. Areas which are frequented by animals, such
as pets or birds.
6m Diameter
360°
2.4m Installation Height
Good Sensitivity
Poor Sensitivity
A - Active
Load
N - Neutral
Field Of View Diagram:
