4
1 General Information
The purpose of this document is to familiarize the customer with the correct operation
of the Vzense ToF DCAM550 products family. This document provides important
information about the camera’s features, hardware specification, safe use of the
camera, and installation procedures.
DCAM550 product family is a series of products designed by Vzense company. It has
two sub-series, DCAM550-U refers to the USB version, DCAM550-P refers to the
Power over Ethernet version.
1.1
Terms of Use
Vzense offers a 1-year-warranty for this camera.
Warranty Information
Please do follow the following guidelines when using the Vzense camera:
Do not remove the product
’s serial number label
Warranty must be void, if the label is damaged or removed and the serial number
can’t be read from the camera’s registers.
Do not open the camera housing
Do not open the housing. Touching any internal components may damage the camera.
Prevent any objects or substances from entering the camera housing.
Otherwise the camera may fail or damaged.
Avoid electromagnetic fields
Do not use the camera near strong electromagnetic fields. Prevent from electrostatic
charging.
Transport in original packaging
Transport and store the camera in its original packaging only. Do not discard the
packaging.
Clean with care
If you have to clean the housing of the camera, follow the guidelines in the notice as
below:
Use a soft, dry clot
h that won’t generate static during cleaning;
To remove tough stains, use a soft cloth dampened with a small amount of
neutral detergent(Pure water); after that wipe dry;
Make sure no any residual detergent after cleaning, before reconnecting the
camera to power
Read the manual
Do read the manual carefully before using the camera.
