6
to customer at original cost.
Below is the PoE+ injector available vendor list.
Vendor
Model Number
H3C
EWPAM2NPOE
TP LINK
TL-POE170S
2.3
Usage
Don’t try to open the camera housing. Each camera has been calibrated at the factory
to achieve precise measurements. Touching internal components may damage the
camera and cause calibration data lost.
Incorrect plugging in and unplugging of the camera’s power cable can damage the
camera. To avoid switch-on surges damaging the camera, please plug in the power
cable into the camera’s 6-pin connector firstly before getting power supply.
Don’t try to change the position of the lens, may cause damage to the camera.
Do store the camera carefully when not in use, in original package the best.
2.4
Temperature
To avoid damaging the camera and to achieve best performance, please observe the
maximum and minimum housing temperatures in Section 3.1
