SERVICE/MAINTENANCE
• Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
• Before working on this machine stop the tractor, set the brakes, disengage the PTO and
power drives, shut off the engine and remove the ignition key.
• Never work under equipment unless it is securely blocked.
• Frequently check ditcher blades. They should be free of nicks and cracks and securely
fastened.
• Periodically tighten all bolts and nuts and check that all cotter pins are properly installed to
ensure unit is in a safe condition.
• When completing a maintenance or service function, make sure all safety shields and guards
are installed before placing unit in service.
• Always use the proper tools or equipment for the job.
• After servicing, be sure all tools, parts and service equipment are removed from the ditcher.
• Do not allow debris, grease or oil to build up on any part of the machine.
• Where replacement parts are necessary for periodic maintenance and servicing, genuine
factory replacement parts must be used to restore your ditcher to original specifications.
W&A Manufacturing Company will not be responsible for injuries or damages caused by the
use of unapproved parts and/or accessories.
• Never use machine until all guards and safety devices are securely in place.
STORAGE
• Following operation, or when unhooking the ditcher, stop the tractor, set the brakes, disengage
the PTO, shut off the engine and remove the ignition keys.
• Do not allow the driveline to rest on the ground. Hang it on the hook provided. Rust and
mud may interfere with the driveline locking device.
• Store the unit in an area away from human activity.
• Do not allow children to play on or around the stored unit.
8
