background image

W & A

WATERMIZER

OPERATOR’S MANUAL

Congratulations on your purchase of a new W & A  WaterMizer.  Be sure to read all the instructions
in this manual before placing the machine in use.  Safety precautions along with adjustments
should be learned and also taught to anyone who operates the machine.  Remember, an implement
which is properly maintained, adjusted and safely operated saves time, labor and money.

After operating season, thoroughly clean your WaterMizer and inspect it.  Preventive maintenance
pays dividends.  Your dealer has original equipment parts which assure proper fit and best
performance.

Thank you for purchasing this W & A product.

**********************************************************************

For Your Convenience, Please Fill In The Following:

Model: WaterMizer               Item No. 751000

Serial Number: __________________

Dealer Name: _______________________________ Date Purchased: ________________

Quality Products from

P.O. Box 5238, Pine Bluff, Arkansas 71611

Phone: (870) 534-7420

Fax: (800) 336-1318

Website: www.wamfgco.com

W & A  MANUFACTURING  COMPANY

SPECIALIZED

FARM

EQUIPMENT

1

Summary of Contents for WaterMizer









Reviews: