W APPLIANCE Commercial COOL CCF35WA, User Manual

Page 7

PROTECTION FROM HEAT AND MOISTURE

•  Do not install your freezer in any location where heavy moisture is present or if 

the location is not properly insulated.  This freezer is not designed to operate in 
temperature setting below 55° Fahrenheit.

•  Location for the freezer should be on a hard surface and away from direct 

sunlight and heat source, e.g., radiators, baseboard heaters, cooking appliances, 
etc.

STARTING YOUR NEW FREEZER

1.  After cleaning your freezer thoroughly. Wipe the outside with a soft dry cloth, the 

interior with a clean moist cloth.

2. Insert the power supply cord into the electrical outlet.

3.  Turn the thermostat dial to an initial setting of “7” for 24 hours and then set the 

freezer to your desired setting.

NOTE:

 · As the door gets pressed in during shipping, the gasket may have to be reset.  This is 

done to prevent the cool refrigerated air from escaping.  If there is a gap between the 
door gasket and the cabinet, set the gasket by gently pulling it out of the seal gap.

SET UP & USE