background image

2

IMPORTANT:

           

The manufacturer will not accept liability for any resulting damages caused 

by the non-observance of this manual or any unauthorised modification to the

equipment.

 

• Never leave any cables lying around.

 

• Do not insert any objects into the air vents.

 

• Never remove warning or informative labels from the equipment.

 

• Do not open the equipment and do not modify the equipment.

 

• Only use the equipment indoors.

 

• Do not expose to flammable sources, liquids or gases.

 

• Make sure you don’t use the wrong kind of cables or defective cables.

 

• Do not drive the inputs with a signal level bigger, than required to drive the equipment to   

 

  its full output

 

• Prevent distortion! Make sure that all components connected to the speaker have 

             sufficient power ratings. Distortion will be generated if the components are operated 

             at their limits.

 

• The user is responsible for correct positioning and operating of this fixture. The 

 

  manufacturer will not accept liability for damages caused by the misuse or incorrect 

 

  installation of this equipment.

 

• Repairs and servicing must only be carried out by a qualified technician. 

 

  THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.

 

• WARRANTY; One year from date of purchase.

Summary of Contents for SPEA38 - DSR 12













Reviews: