Safety Information
Attention! Important safety instructions. Please read this
manual thoroughly before using this product.
Electrical Safety
Always unplug this adjustable bed frame from the electrical outlet before any maintenance or cleaning
of the frame. To safely disconnect, make sure all of the controls are in the off position, and then remove
the plug from the outlet. To prevent fire or shock hazard, do not expose this unit to moisture. Keep
the power cord away from heated surfaces. Do not operate this adjustable bed frame and contact the
manufacturer for repair if (1) it is not working properly, (2) it has a damaged cord or plug, (3) it has
been dropped or damaged or (4) has been dropped into water.
Electrical Grounding
This product is equipped with a polarized or grounded electrical power cord. The power cord will only
fit into a grounded, electrical surge protection device (not included) or a grounded electrical outlet. The
use of adapters is not recommended unless the outlet is checked by a qualified electrician to ensure the
proper grounding of the adapter.
For optimal safety, your adjustable bed should be plugged into a surge protector.
Electrical Rating
Input—100-240V, 50/60Hz, 1.6A; Output 29VDC, 2.0A
Battery Precautions
Please follow these precautions when using bat-
teries in this adjustable bed frame:
1. Danger of explosion if the battery is incorrectly replaced. Replace only with the 6LR61 9V
batteries and LR03 AAA batteries.
2. Do not mix different types of batteries together (Alkaline, Rechargeable and Carbon-Zinc) or
old batteries with new batteries.
3. Be sure to follow the correct polarity when installing new batteries as indicated in the battery
compartment.
4. If the adjustable bed is not going to be used for a long period of time, remove the batteries
from the battery compartment to prevent damage or injury from possible battery
leakage.
5. Do not attempt to recharge a battery that is not intended to be recharged. This may result in an
overheating of the battery or rupture that could result in injury.
In Home Use & Hospital Disclaimer
Your adjustable bed frame is strictly designed for in-home use only. It is NOT designed for hospital or
nursing home use and is NOT designed to meet hospital standards. Do not use this bed with TENT TYPE
oxygen therapy equipment or near explosive gases. Misuse will void product warranty.
Lubrication and Cleaning
Your adjustable bed is designed to be maintenance free. The lift motors are permanently sealed and
lubricated, no additional lubrication is required. Do not apply any lubricant to lift motor lead screws or
any nylon nuts or the base may inadvertently creep downward from the elevated position.
Warranty Warning
Please do not open any control box, motors or hand controls (with the exception of the battery
compartment, if equipped). The product warranty may be void if any of these components are
tampered with. Do not attempt to alter component wiring or adjust or modify the structure of the
product in any way or the warranty will be void. Only WSP can authorize any repairs or replacement
of parts on your adjustable bed.
Pets and Small Children Warning
Immediately dispose of all packing materials as it may pose a smothering risk to small children and
pets To avoid injury, it is not advised to allow children and small pets to play on or under the bed.
Children should not operate your adjustable bed without adult supervision.
Consumers with Pacemakers
Your adjustable bed may be equipped with a massage motor that produces a vibrating motion. It is
possible that some pacemakers may interpret this type of motion as a false sense of movement and/or
exercise. This may or may not affect your pacemaker. If you have any concerns, please consult your
physician.
Your adjustable bed also contains Neodymium (magnets) which may interfere with devices such as
pacemakers, ICD’s and any other device sensitive to magnetic fields. It is strongly recommended that
owners of such medical devices consult their physician prior to using this product.
Product Ratings
The lift motors in your adjustable bed are NOT designed for continuous use. Reliable operation and
full life expectancy will be attained as long as the lift motors do not operate more than 2 minutes
over an 18 minute period, or approximately 10% duty cycle. To ensure reliable functionality and full
life of your adjustable bed, do not attempt to exceed these limits.
Attempting to circumvent or
exceed this rating will shorten the life expectancy of your adjustable bed and may void
the warranty.
Acoustics
Your adjustable bed may contain the optional massage motor. This massage function will emit a
noticeable tone during operation. As the massage intensity level is increased, the volume of the tone will
increase. The volume of the tone is directly related to the location of your adjustable bed. As an example,
the surrounding environmental noise that might have been present in the showroom where you purchased
your adjustable bed could have covered some of the noise from your adjustable bed massage motors.
When your adjustable bed was installed in your home you might notice an increase in volume in wood
floorings or carpets. In some normal base operations, you might notice some noise coming from the
wheels which allow your adjustable bed to maintain its distance from the wall. These wheels will make
contact with the steel platform supports of your adjustable bed creating a contact noise when you enter,
exit or shift weight while on the bed. This is normal.
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; (2) This device must accept any
interference received, including interference that may cause undesired operation. To comply with the
FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding the RF exposure requirement
and void user’s authority to operate the device.
Radio Frequency is 2.4-2.48 GHz
Weight Restrictions
The structure of your adjustable bed will support the recommended weight when distributed evenly
across the bed. The adjustable bed is not designed to support or lift this amount in the head or foot
sections alone. You should enter and exit your adjustable bed with the base in the flat (horizontal)
position.
DO NOT STAND ON THE BASE AT ANY TIME. DO NOT SIT ON THE HEAD OR
FOOT WHILE IN THE RAISED POSITION.
The recommended weight limits are Twin/TwinXL/
Full/FullXL/Split Queen/Queen/Split Cal King/Split King: 650 lbs. Exceeding this weight restriction
could damage the bed and/or cause injury and will void the warranty.
Moving After Installation
Do not place adjustable bed base vertically on its head or foot sections. This may cause injury to
persons or damage to the base.
Fabric Cleaning Information
Spot clean only with a water based shampoo or a foam upholstery cleaner. Pretest a small, inconspicuous
area before proceeding. Do not over wet or use solvents to spot clean. Hot water extraction or steam
cleaning is not a recommended cleaning method. To prevent overall soiling, frequent vacuuming or light
brushing with a non-metallic stiff bristle brush to remove dust or grime is recommended.
PLEASE SAVE THIS MANUAL!
User Information
Please take a moment and write down the serial number in the space
provided below, in case you need to refer to it in the future. This
information can be found on the side of the power supply, on the
underside of the adjustable base, on the outside of the box on the
main label and on the warranty registration card.
Model # U100
Serial Number:
Customer Care
Toll Free 888-846-3840
Email: customerservice@wsilvermx.com
