Page 5
Step 12
Use remote control to slightly
raise head and foot sections.
Install the fabric cover by pulling
it over the 4 corners of the
adjustable base, make sure the
elastic edges are tucked all the
way under the base.
Use remote control to lower the
base back to flat position.
You can now place your mattress
on the adjustable base surface.
Step 11
Plug the power cord into a grounded electrical outlet.
NOTE: FOR OPTIMAL SAFETY, A SURGE
PROTECTOR SHOULD BE USED (NOT
SUPPLIED WITH THIS ADJUSTABLE BED).
Step 10
Align fabric cover holes with plastic holder holes and
insert the mattress retainer into the base.
Look under the base and make sure the are no cords
interfering with base mechanism.
IIMPORTANT!
Raise head and foot
sections slightly before
installing the fabric cover to
reduce risk of damaging the
fabric.
