8
Gear, a higher number indicates a higher gear if
the value is 0 when the engine is off
Lights icon, hold down the MODE button to turn
the lights on / off
Cruise control: Hold a steady speed for 5
seconds to start cruise control, the corresponding
icon will be displayed. To deactivate cruise
control, brake or change speed
Starting method: Just add speed and the scooter
will start (Zero), it is necessary to bounce your
feet and then add gas (Non)
USB
If another device is connected via USB, the icon
will light up if the device draws more than 100
mA, the icon will start flashing if the device draws
more than 500 mA.
SETTINGS
P01
– backlight
1 (lower)
– 3 (higher)
P02
– speed unit
0 (km) 1 (mile)
P03
– voltage
24 V, 36 V, 48 V
P04
– power save mode
0 off, any other value from 1 to 60 indicates the
number of minutes of inactivity to activate the
power save mode
P05 - Engine power
P06 - Wheel diameter
Unit: inches, accuracy to 0.1
P07
-
Number
of
magnets
for
speed
measurement
1
– 100
P08 - Speed limiter
P09 - Starting method
Just add speed and the scooter will start (Zero), it
is necessary to bounce your foot and then add
gas (Non)
P10 - Drive mode
0 - by bouncing (off)
1 - electric motor
2 - a combination of the above
P11 - Assistance sensitivity
1
– 24
P12 - Starting speed
0 (lower)
– 5 (higher)
P13 - Magnetic ring adjustment
5, 8, 12
