© W
&
W 05/2007 Version 13
11
Fixing the safety hooks
After screwing the ladder to the ground with both dowels, fold it out and lean it against the door sill again.
Remove the protection fi lm from the safety hooks and affi x them, according to the local height of the shaft door.
Important!
The hooks have to be mounted to the inner side of the ladder beam.
Fix the hooks additionally with the enclosed tapping screws.
Use the enclosed drill for pre-drilling into the aluminium ladder beam.
Every hook has to be fi xed with at least three tapping screws.
Pay attention that the
hooks do not obstruct
the folding function.
position of hooks
TRI-KLAPP 95
