© W
&
W 05/2007 Version 13
12
Fixing the chain
with accompanying
tapping screw
TRI-KLAPP 95
Fix the chain to the landing door apron so that it is accessible from the landing door.
At fi rst check if the distance between the car and the landing door apron is at least 15mm, otherwise
you must choose an alternative fi xing possibility near the lift door.
Important!
The chain has to be fi xed so that there is no danger of stumbling when the ladder is folded out.
The distance to the door sill must be
at least 3cm and max. 8cm.
2) Mounting in parallel to the landing door, also if pit width is max. 1m, when:
-pit depth is less than 1,3m
-vertical mounting is not possible.
In this case the fl oor lever mechanics must not be turned over.
70cm
W
a
ll where
the ladder is
put up
The distance between the wall where the ladder is put
up and the ground fi xing clamp must be 70cm.
The mounting is to be effected like in 1), but the distance between the ground
fi xing clamp and the wall where the ladder ist put up has to be 70cm. Also the
chain has to be fi xed to the ladder beam nearest to the shaft adit. If necessary
the chain has to be fi xed to the other ladder stringer.
Important!
The chain has to be fi xed so that there is no danger of stumbling if the ladder is
folded out.
