17
5
CAN Router
CAN Repeater
Diagnostics
5
Diagnostics
The diagnostic software for the CAN router/repeater enables fault analysis and
status monitoring for the devices.
For the diagnosis, you require
• a PC or laptop,
• a diagnostic interface
• a connection cable to the vehicle
• The diagnostic Software "Trailer CAN Router-Repeater"
5.1
Diagnostic port
5.1.1 ISO7638 towing vehicle/trailer interface
The connection of the diagnostic software to the CAN router/repeater can be made
via the towing vehicle-/trailer interface with an ISO 7638 connection adapter.
!
On vehicle combinations with multiple CAN routers in sequence, the CAN router
that is connected directly with the ISO 7638 interface is always diagnosed.
5.2
Hardware
PC / Laptop
WABCO offers you a workshop-suitable, impact- and contamination-resistant laptop.
This "Toughbook" with preinstalled Diagnostic Software can be obtained from
WABCO.
The Diagnostic Software will run on all standard PCs with an operating system
Microsoft Windows 2000 or higher.
There are no other special requirements of the hardware. The PC should however
have a free USB connector or a free serial connector (COM interface 9-pin) to
connect the diagnostic interface.
Diagnostic Interface
Diagnostic cable
Connection adapter
446 301 021 0 (serial)
CAN-Converter
446 300 470 0
446 300 360 0
446 301 022 / 030 0
(USB)
446 300 361 0 or
446 301 362 0
446 300 360 0
