INSTALLATION INSTRUCTION
© 2018 W
ABCO
All rights reserved – 815 980 352 3 Doc-Code 1
11 Index Edition 12.2018
Mul-T-Lock Padlock C13 13 mm 183 100 001 4
Scope of supply
1x Mul-T-Lock Padlock C13 13 mm
1x bag with coloured markings for keys
1x key card
3x key (kd)
Keep the key card in a safe place. You need the key card to order additional keys.
Installation
WARNING
Danger of accidents
During assembly there is a risk of accidents due to moving vehicles and vehicle parts.
–
Secure the vehicle with chocks and fasten moving vehicle parts.
1.
– To open the padlock, insert the key into the Mul-T-Lock Padlock housing and turn
the key by 45°.
In this position the shackle can be fully pulled out.
2.
– Place the shackle through the openings of the lock.
3.
Never lock the padlock without first having put the lock housing into the OPEN
position with the key. This will destroy the Mul-T-Lock Padlock.
– To close the padlock, insert the key into the Mul-T-Lock Padlock housing and turn
the key by 45°.
Ö
In this position the shackle can be fully pushed in.
Maintenance and care
NOTE
Damage of locking mechanism
Teflon clogs the locking mechanism.
–
Never use Teflon.
Cleaning and care of the cylinder: Use brake cleaner for cleaning. Then drip a little light oil into the keyhole and rotate back and
forth a few times with the key.
Suitable oil types: Sewing machine oil, gun oil, low-viscosity synthetic engine oil.
400 608 150 0 400 608 151 0
400 608 153 0 400 608 154 0
