INSTALLATION INSTRUCTION
© 2018 W
ABCO
All rights reserved – 815 980 340 3 Doc-Code 1
11 Index Edition 06.2018
DOOR LOCK ONE WAY 183 210 160 0
Scope of supply
1x locking piece
1x door rod shackle
1x steel cable
One-way door lock for door rod distances of 265 mm to 470 mm.
Installation
WARNING
Danger of accidents
During assembly there is a risk of accidents due to moving vehicles and vehicle parts.
– Secure the vehicle with chocks and fasten moving vehicle parts.
CAUTION
Risk of crushing fingers/hands
During assembly there is a risk of crushing fingers/hands.
–
Make sure that your fingers are not crushed.
CAUTION
Risk of injury for feet
A lock that falls from height can cause injuries due to its weight.
– Wear safety shoes during assembly.
1.
–
Make sure that the identification number is identical for locking piece, door rod
shackle and steel cable.
2.
– Place the door rod shackle around the door rod and push the locking piece onto
it.
3.
– Pull the steel cable through the door handle eyelet.
4.
– Insert the steel cable end into the opening of the locking piece. The cable must
engage properly.
Ö
The door lock is pre-assembled.
5.
– Use an angle grinder to open the locking bar at the markings.
i
i
After cutting through the door lock, it is damaged and cannot be used again.
Identificaton number
Identificaton number
