13
Installation
5.3 Final checks
Mechanics and alignment
Before you drive the vehicle with the OptiFlow
TM
Tail system, ensure the following:
– All OptiFlow
TM
Tail components must be firmly secured.
– Check if all mechanisms on the panels function with free movement. Operation of the panels must
be possible without restriction.
– Check if each bracket is fastened with the correct torque.
–
Check if the panels fit closely on the trailer without a gap when the system is deployed.
– Check if the top panel
(1)
, when folded out, is below the respective side panel
(2)
.
If you have identified a misalignment, align the side panels correctly using the stopper by adjusting the
distance to the trailer’s outer edge:
1. Unscrew the screw M8 (
a
).
2. Position the stopper (
b
) so that the top panel is flushing with the side panel, see figure below
3. Tighten the screw M8 with 10 +/-2 Nm (
c
).
Summary of Contents for OptiFlow Tail
