INSTALLATION INSTRUCTION
© 2018 W
ABCO
All rights reserved – 815 980 344 3 Doc-Code 1
11 Index Edition 07.2018
MTL PADLOCK 183 100 001 4
Scope of supply
1x MTL Padlock
1x bag with coloured markings for keys
1x key card
3x key (kd)
i
i
Keep the key card in a safe place. You need the key card to order additional keys.
Installation
WARNING
Danger of accidents
During assembly there is a risk of accidents due to moving vehicles and vehicle parts.
–
Secure the vehicle with chocks and fasten moving vehicle parts.
1.
– To open the padlock, insert the key into the MTL Padlock housing and turn the key
by 45°.
In this position the shackle can be fully pulled out.
2.
– Place the shackle through the openings of the lock.
3.
i
i
Never lock the padlock without first having put the lock housing into the OPEN
position with the key. This will destroy the MTL Padlock.
– To close the padlock, insert the key into the MTL Padlock housing and turn the
key by 45°.
Ö
In this position the shackle can be fully pushed in.
Maintenance and care
NOTE
Damage of locking mechanism
Teflon clogs the locking mechanism.
–
Never use Teflon.
Cleaning and care of the cylinder: Use brake cleaner for cleaning. Then drip a little light oil into the keyhole and rotate back and
forth a few times with the key.
Suitable oil types: Sewing machine oil, gun oil, low-viscosity synthetic engine oil.
400 608 100 0 400 608 101 0 400 608 102 0
400 608 103 0 400 608 104 0 400 608 105 0
400 608 106 0 400 608 107 0
