8
1.
Important safety notes
1.4
Safety regulations for proper use
18.
Only have repairs carried out by a qualified specialist! Repair work may only be carried out
by persons who are qualified for the relevant repairs and who are familiar with the
appropriate health and safety requirements.
19.
Protect the machine from damp.
20.
Constantly check the machine for damages. Replace damaged parts only with original parts
and have these replaced by a specialist. The guarantee and warranty is voided if
accessories and replacement parts are use that are not designed for the machine.
21.
Do not remove the generated shavings with your hand. Use the appropriate tools (hand-
held sweeper, hook, brush).
22.
Tools and work pieces may never be changed when the machine is running.
23.
Do not brake work pieces and bush using your hand or another object.
24.
Never leave the chuck key fitted (even when not in operation).
25.
Pay attention to the spread of the lathe chuck.
26.
The maximum revolution range specified on the lathe chuck may not be exceeded.
27.
Always keep safety door to motor closed
28.
The safety door to motor may only be opened by trained personnel with a special key by
unplugged safety contact pug
29.
Turning steels must be firmly tensioned, at the correct height and as short as possible.
30.
Do not measure at the rotating work piece (risk of accident, measuring tools will be
damaged).
31.
When working between the tips, check the locking lever of the tailstock for firm seating.
32.
When working with the automatic feed, always pay attention to ensure that the tool skid
does not come up against the lathe chuck or the tailstock.
Summary of Contents for CC-D6200 hs
