47
www.nieaf-smitt.com
RECALL
function
1. Press STORE button two seconds to enter into
RECALL function
On the left upper corner shows XXXX, which states
current storage serial number. On the right upper
corner shows XXXX which states how many current
storage is used.
2. Use & - to select serial number XXXX
on the left upper corner and record data on the
right upper corner
3. To finish above RECALL function, press EXIT button
4.9 Parameters (SET)
1. Press the RANGE button second seconds to enter
into SET function, then press shortly once, change
on setting content
Setting content includes(in sequence)
A: upper limit buzzer alarm
B: lower limit buzzer alarm
C: auto power off time
D: turn off phonating
E: back lit time
2. Use
‹
+ -
›
buttons to select the parameter
3. Press SET button continuously to switch to setting
content, till exiting set up to testing mode, so the
updated setting content is saved.
4. If press EXIT button in this period, all setting can’t
be saved
4.10 AC+DC
1. In all the measuring mode VAC, mV (AC), 10 A(AC),
mA (AC), uA (AC), press button EXIT for 2 seconds to
enters into AC+DC testing. the precision is the same
as AC measure, LCD shows AC+DC signal
2. Press button EXIT to exit
4.11 Empty battery indication
When the icon appears alone in the display , the
battery should be replaced.
