19
F-001/F-001L
When installing the Non-Luminaire version (F-001)
INSTALLING THE LUMINAIRE MODULE
11
When installing the Luminaire version (F-001L)
13
12
1. Install the mounting plate by removing 1 and loosening
2 screws from the adapter plate and twist-locking the
mounting plate into place. Twist the cover on - make
sure it is on tight.
2. If you purchased F-001 - you are now ready to power on
your fan.
1. Attach blue wire from motor to blue wire on LED module and
white wire from motor to white wire on LED module.
2. Locate the 3 Luminaire module screws (5/32*8mm Philips
Head Screws) and install LED module with said screws.
3. Install PC shade firmly - make sure it is on tight.
