21
F-081L/ F-083L
16
15
INSTALLING THE LUMINAIRE MODULE/GLASS
11
1. Remove 1 screw from the adapter plate for future use and
loosen the two others from the outer perimeter of the adapter
plate and keep for future use.
2. Raise and hold the LED luminaire module close to the mount-
ing plate and proceed to secure the wire connections. Connect
the white wire connectors from the luminaire module to the
white wire of the fan. Connect the blue wire from the fan to
the blue wire from the LED module.
3. Tuck connections neatly into adapter plate. Place the lumi-
naire module/plate and twist into key lock position. Tighten
the two loosened screws and screw in the previsouly removed
screw. against the adapter plate. Raise glass shade up against
the luminaire module, and secure it to fan by turning glass
clockwise until snug.
