4 /4
N1
L1
L2
N2
N2
L2
L1
N1
N2
L1
N1
L2
L2
N1
L1
N1
L1
L2
N2
N2
N1
L1
L2
N2
L1
N2
L2
N1
N1
L1
L2
N2
N1
L1
L2
N2
N1 L1
L2
N2
Earth Left
MODEL: WLTC-RT
MODEL: WIC-RT
Earth Right
MODEL: WRTC-RT
MODEL: WXC-RT
Field Cutting and Field Drilling
Remove the end cap and save.
Use a metal cutting power saw (preferably in a
miter box) to cut the track, insulation material,
and copper bus bars vertically with one
straight cut.
If the mounting openings are not in the proper
position to secure after field cutting, use a
power drill to drill an appropriate number of
mounting holes. The holes should be 3/16” in
diameter, and drill in the top centerline of the
track along the track length.
CAUTION: Remove any burrs that may
have resulted from the cut or drill. There
should be no burrs between the copper
wires and the aluminum track housing.
Replace the End Cap at the end of track and
secure with a screw.
N1
L1
L2
2
N
2
N
L2
L1
N1
Cut Flush
44 Harbor Park Drive
Port Washington, NY 11050
800.526.2588
www.waclighting.com
