15
F-005L
10
NOTE:
Wall control not included. A Bluetooth wall control accessory can be purchased separately.
NOTE:
For multi-location wiring, skip to the next step.
1.
Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2.
Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3.
Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4.
Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5.
Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6.
Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7.
Fasten the wall plate to the wall mounting plate.
INSTALLING THE OPTIONAL WALL CONTROL
08
Summary of Contents for F-005L-MB
