29
F-005L
TROUBLESHOOTING
16
My Fan Will Not Start
1.
Check main and branch circuit fuses or circuit breakers.
2.
Check line wire connections to fan and switch wire connections in the switch housings.
WARNING
: Make sure the main power is turned off!
My Fan is Noisy
1.
Allow for 24-hour break-in period. Most noises associated with a new fan will go away during this time period.
2.
Check to make sure the screws which attached to the blades (and blade arms when applicable) are tight.
3.
Check to make sure all screws in motor housing are snug.
4.
Make sure light cover is tightened and/or glass is snug.
5.
Tighten the hanger bracket screws and make sure the outlet box is secured.
6.
Your wire connectors may be rattling against the fan’s canopy.
7.
Make sure you have a cUL/UL approved outlet box and it is installed correctly.
My Fan is Wobbling
1.
Tighten the setscrews in the downrod.
2.
Make sure your hanger ball assembly is locked into place in the hanger bracket.
3.
Tighten the hanger bracket screws to the outlet box.
4.
Make sure the fan blades are properly aligned and securely fastened to the motor housing assembly/blade arms.
5.
Make sure the gaps between the blades are evenly distributed.
6.
Make sure you are using an approved cUL/UL listed outlet box and it is installed correctly
Summary of Contents for F-005L-MB
