11
F-068 / F-068L
Remember to
disconnect the power at the circuit breaker.
1.
Remove 1 of 2 screws from the bottom of the mounting
bracket and save for use in section 11. Loosen the
other screw (
FIG.5
).
2.
Pass the 120-volt supply wires through the center hole in the mount-
ing bracket as shown (
FIG.6
).
3.
Secure the mounting bracket to the ceiling outlet box with the screws
and washers provided with your outlet box.
NOTE:
Make sure that mounting screws are tight.
FIG.5
FIG.6
UL/Cul Listed
Electrical Box
Mounting Bracket
Mounting Screws
120V Wire
Mounting Bracket
Screw
0
6
INSTALLING THE MOUNTING BRACKET
