BA 1001/1501/2001 us – Edition 3.3 * 12001b330.fm
3-15
Operation
Mirrors (option)
WARNUNG
WARNING
W
Accident hazard if mirrors are adjusted incorrectly!
Can cause severe injury or death.
• Use safety-oriented ladders and work platforms for adjustment work on the
machine.
• Never use machine parts or attachments/superstructures as a climbing aid.
• Do not adjust the mirrors during machine travel.
• Immediately replace damaged or broken mirrors.
• Additional equipment or attachments must not impair visibility.
• Convex mirrors enlarge, reduce or distort the field of view. Bear this in mind
when adjusting and using such mirrors.
WARNUNG
WARNING
W
Injury hazard to persons in the danger zone!
Can cause severe injury or death.
• Follow the safety instructions.
• Check the surroundings constantly.
• Put the machine into operation/machine travel only if visibility is sufficient
(have another person guide you if necessary).
Adjusting the outside rearview mirrors on left and right
Important
We recommend having the mirrors adjusted by a second person.
Adjust the mirrors in order to:
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear edges of the machine in the mirrors.
Fig. 26: Mirrors (symbolic representation)
