3-48
OM 803 us – Edition 3.7 * * 803b330.fm
Operation
3.12 Shatter protection (option) (from serial no. AI00967)
DANGER
Piercing/penetration hazard by objects from the front!
Causes serious injury or death.
•
A shatter protection must be installed on a canopy version if an attachment
(a hammer, for example) causes fragments to fly around. This shatter pro-
tection takes over the function of a front window.
•
Pay attention to the restricted work range (see fig. 109).
•
Machine operation is prohibited without a shatter protection.
•
For 803 machines up to serial number AI00966, operation with an attach-
ment causing fragments to fly around is absolutely prohibited, because a
shatter protection cannot be mounted.
DANGER
Accident hazard in conditions of restricted visibility due to
rain, snowfall, dust, etc.!
Causes serious injury or death.
•
Stop machine operation immediately.
Information!
The shatter protection protects the operator against fragments from the front.
• The machine owner must ensure that the hazard situation is evaluated and that
the national regulations are observed.
• The machine owner must ensure that only work is performed that does not
require any higher protection.
• Accidents cannot be fully avoided despite equipping a machine with protective
structures.
Information!
Do not use brushes, steel wool or other abrasive cleaners for cleaning the polycar-
bonate disc. Do not wipe dust in a dry state.
Information!
Protective structures may only be installed or removed by a Wacker Neuson ser-
vice center.
