9
Follow A Safety Program
Know The Rules
Most employers have rules governing operation and
maintenance of equipment. Before you start work at a
new location, check with your supervisor or the safety
coordinator. Ask about the rules you will be expected
to obey.
The Occupational Safety and Health Administration
(OSHA) enforces federal laws within the United States
that apply to the safe operation, application and
maintenance of equipment on a worksite. It is the
employer’s responsibility to comply with these laws.
A federal representative may periodically inspect a
worksite to see that these laws are being followed.
There may also be local, state/provincial, federal laws
or international regulations that apply to this equipment
and its use, along with specific worksite or employer
rules. It is important that you know and comply with all
applicable laws and rules, including those requiring
operator training and certification.
Safety Rules
s
s
s
s
s
s
s
s
s
s
Know And
Understand
Rules Of
Operation
10
Follow A Safety Program
Some Rules You Must Work By
— Know the limitations and operating characteristics of
the compact excavator. Do not overload it.
— Always wear the seat belt, if equipped. If the compact
excavator is equipped with a foldable TOPS/ROPS,
do not fasten the seat belt when the TOPS/ROPS is
in the down position.
— Always have all shields and guards properly installed
before operating the machine.
— Inspect the machine and all attachments before each
use as specified by the manufacturer and your
employer. Ensure the attachment is properly installed.
(See page 17,
Quick-coupling Device Safety
.)
— Only use parts and attachments that are approved by
the original equipment manufacturer.
— Never modify or remove any part of the equipment
(except for service—then make sure it is replaced).
— Read and understand all safety signs installed on the
machine.
— Know the location of other personnel and machines and
make sure they are a safe distance from the machine.
— Know the worksite. Be aware of possible hazards that
you may encounter.
lbs
kg
?
Know Machine
Limitations
And Operating
Characteristics
Be Aware Of
Worksite Hazards,
Keep Bystanders
Away
Inspect
The Machine Before
Each Workday
