10 Operation and use
100_0202_op_0020.fm
25
10 Operation and use
10.1
Before commissioning
10.1.1
Inspection before commissioning
Check the machine and components for damage. In the event of visible damage, do not operate the
machine and immediately contact a Wacker Neuson dealer.
Check the switching and safety lever for smooth and effortless movement.
Ensure that loose packaging material has been removed from the machine.
Current regulations of the local authorities for noise emissions.
Charge situation of rechargeable battery.
Check the screwed connections for a secure seat.
10.1.2
Charge and deploy rechargeable battery
Charge the rechargeable battery
1. Place the battery charger and rechargeable battery on a dry and clean working area.
2. Connect the battery charger to the power source.
3. Then connect the rechargeable battery to the battery charger.
4. Check the charge situation of battery regularly.
5. If the rechargeable battery is completely charged, unplug the rechargeable battery from the battery
charger and de-energize the battery charger.
Deploy the rechargeable battery
1. Position the starter lever in the OFF position.
WARNING
Improper handling may result in injury or serious material damage.
Please read and follow all safety instructions in this operator's manual.
NOTICE
Perform control procedures according to the
Maintenance
chapter. If necessary, top off
missing fuel, lubricants and coolants, see chapter
Technical Data.
NOTICE
Only use battery chargers and rechargeable batteries from Wacker Neuson.
NOTICE
The electrical contacts and contact surface of the rechargeable battery must be clean and
dry.
Item
Designation
Item
Designation
1
Starter lever
2
Rechargeable battery
2
1
Summary of Contents for AP1840 Series
Page 4: ...1 CALIFORNIA Proposition 65 Warning 4 100_0000_0024 fm...
Page 45: ......
Page 46: ......