Safety
4.3 Structual changes
4.3
Structual changes
Warning!
Risk of injury due to structural changes.
Unauthorized structural changes to this machine can pose a risk to oper-
ators and/or third parties, as well as damage to the machine and/or other
property.
• Do not make any structural changes without the manufacturer's writ-
ten consent.
In particular, a structural change shall be deemed to have occurred:
• When opening of the machine and permanent removal of compon-
ents.
• Installation of spare parts that do not come from the manufacturer or
are not equivalent in design and quality to the original parts.
• Attachment of accessories of any kind that do not originate from the
manufacturer.
The manufacturer's liability and warranty are also void in the event of un-
authorized structural alterations.
Spare parts or accessories from the manufacturer can be installed or re-
moved safely.
Further information is available on the Internet at -
.
4.4
Responsibility of the operator
The operator is the person who operates this machine himself for com-
mercial or economic purposes or who leaves it to a third party for use/ap-
plication and bears the legal product responsibility for the protection of
personnel or third parties during operation.
• The operator must make the operator’s manual accessible to the per-
sonnel at all times and ensure that the operator has read and under-
stood the operator’s manual.
• The operator’s manual must be kept ready to hand at the machine or
at the place of use.
• The operator must hand over the operator's manual to any other op-
erator or subsequent owner of the machine.
• The country-specific regulations, standards and directives on acci-
dent prevention and environmental protection must also be observed.
The operator’s manual must be supplemented by further instructions
for compliance with operational, official, national or generally applic-
able safety guidelines.
16
Operator’s Manual | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | 5100060577 | 01/2023 |
Version: 5 | [en]
