BS 65-V
Safety Information
wc_si000275gb.fm
15
3.2.17
ALWAYS be sure the rammer will not tip over, roll, slide, or fall when
not being operated.
3.2.18
ALWAYS turn the engine OFF when the rammer is not being operated.
3.2.19
ALWAYS guide the rammer in such a way that the operator is not
squeezed between the rammer and solid objects. Special care is
required when working on uneven ground or when compacting coarse
material. Make sure to stand firmly when operating the machine under
such conditions.
3.2.20
ALWAYS operate the rammer in such a way that there is no danger of
it turning over or falling in, when working near the edges of breaks, pits,
slopes, trenches and platforms.
3.2.21
ALWAYS store the machine properly when it is not being used. The
machine should be stored in a clean, dry location out of the reach of
children.
3.2.22
ALWAYS close fuel valve on engines equipped with one when
machine is not being operated.
3.2.23
ALWAYS operate machine with all safety devices and guards in place
and in working order. DO NOT modify or defeat safety devices. DO
NOT operate machine if any safety devices or guards are missing or
inoperative.
Summary of Contents for BS 65-V
